The Fiat Code system is not compatible with certain aftermarket remote-start systems, which may cause starting problems and deactivate its protection function.

The light means the brake fluid reservoir is below its minimum level, possibly because of a circuit leak.

Restore the brake fluid level and check that the light turns off; if it stays on, contact a Fiat Dealership.

For 1.0, 1.3, and 1.5 Mild Hybrid or 1.4 Turbo MultiAir versions, replace spark plugs at the Service Schedule frequency.

To prevent serious engine damage, use only plugs certified for the engine, keep every plug the same type and brand, and consider a FIAT Dealership for replacement.

Release the accelerator until the light stops flashing, continue at moderate speed, avoid further flashing, and contact a Fiat Dealership promptly.

The light indicates an ABS fault; braking remains effective without ABS, so drive carefully and contact a Fiat Dealership as soon as possible.

Every 3,000 km, check the engine oil level and top it up if required.

Under demanding use, have the pollen filter checked and replaced if necessary more often than the normal service schedule.

Press the hazard-warning button to switch the lights on or off, and follow the highway code where you are driving.