Unlocking the vehicle suspends charging; it resumes after you lock it again, but if it does not resume automatically, remove and refit the charge cable.

Close the doors, bonnet, and tailgate, then press the Lock button on the smart key to secure the vehicle.

After powering off the vehicle, pull the light lever toward the steering wheel to enable Follow Me Home lighting.

The system then turns on the corresponding exterior lights to illuminate your way home.

With automatic lighting selected at position 1, the vehicle operates the dipped beams, side lamps, switch illumination, and backlights according to ambient light.

If the TPMS warning lamp illuminates, a tire pressure is low, so check the tire pressures.

If it flashes and then remains on, the system has detected a fault.

If the engine emission malfunction indicator stays on after startup, stop when safe, turn off the Start switch, and contact an MG Authorised Repairer as soon as possible because continued driving may damage the catalytic converter.

A flashing engine emission malfunction indicator means a severe engine misfire; stop when safe, turn off the Start switch, and contact an MG Authorised Repairer immediately.