1. Find the recommended pressure for your tires on the driver's-side B-pillar; values vary with load and driving conditions.
2. Check and adjust pressure only when the tires are cold: drive less than 1.6 km, or park out of direct sunlight for at least three hours.
3. Use a suitable tire-pressure gauge, then adjust the pressure as needed.

1. Stop safely before operating the center display, then open Energy Management and set the target state of charge.
2. Plug in the charging gun and activate the charging pile in time before travel.
3. Open Schedule Charging, turn on its master switch, set the start and end times, and tap Save.
4. If enabled, charging continues past the scheduled end time until the battery reaches the target state of charge.
5. To cancel it, open Schedule Charging and turn off its master switch.

Use the mechanical key to open the door, or use the NFC key or Bluetooth key in the smart APP to open and start the vehicle.

If the vehicle still cannot be started, contact a smart Authorized Service Partner.

The displayed remaining range is only an estimate and may not reflect driving style or environmental conditions.

Speed, trip conditions, hills, cargo, tires, climate control, accessories, wind, and extreme temperatures can change energy consumption.