The manual recommends having spark plug replacement and inspection done by a Maruti Suzuki authorized workshop because special procedures, materials, and tools are required.

1. Let the bulb become cool enough to handle, and wear gloves and a long-sleeved shirt during replacement.
2. Remove the screws and take off the rear combination light cover.
3. For the turn signal, tail/brake, or reversing light, push the bulb in and turn it counterclockwise to remove it, then turn the replacement clockwise to install it.
4. Use the same bulb number as the bulb or unit currently installed.

The malfunction indicator light should turn on with the ignition and go out after starting; if it comes on while running, have the emission control system serviced at a Maruti Suzuki authorised COMMERCIAL workshop.

The tire-changing tools are stored behind the driver's seat; turn the jack shaft counterclockwise and pull it from its bracket.

The spare tire is stored under the bed.

1. Loosen the spare tire holder hook nut.
2. Unhook the spare tire holder and lower it slowly.
3. Remove the screw in the center of the spare tire, then remove the tire.