With the headlights on, push the lever away to turn on the high beams, then pull it to center to turn them off.

To flash the high beams once, pull the lever toward you and release it; this works with the headlights on or off.

Do not rely on Automatic High Beam; watch your surroundings and manually switch between high and low beams when necessary.

• The battery may be depleted if the smart key or wireless remote stops working, the detection area shrinks, or the key LED does not turn on.
• Replace the battery when necessary, with replacement by a Toyota dealer recommended because the electronic key may be damaged.

1. On the multimedia system, select “Vehicle customize,” “Charging,” and “Battery cooling.”
2. Change the setting as desired, but turning battery cooling off may restrict traction battery output depending on driving conditions.

1. Try unlocking the doors three times with the wireless remote control or door lock switches, or stop charging on the meter display.
2. If it remains locked, open the hood and pull the emergency release wire to remove the connector, then secure the wire handle to its attachment.
3. Use the emergency release only in an emergency, and have the vehicle inspected by a Toyota dealer immediately if the problem continues.

Contact a Toyota dealer for replacement; use e-Transaxle Fluid TE, because another fluid may cause noise, vibration, or eAxle damage.

The displayed driving range is a reference distance, and the actual distance you can drive may differ from it.

Drive smoothly at moderate, constant speeds, use climate control moderately, maintain specified tire size and pressure, keep a safe distance, and avoid unnecessary weight.