Open the glove-compartment lid by pushing the handle up, or open the cover on the right-side trim in the trunk.

Never repair a blown fuse or substitute another color or amperage; the separate sheet lists fuse types and locations, and an overload could cause a vehicle fire.

The Flat Tire Monitor indicates lost tire pressure; reduce speed, stop cautiously, and avoid sudden braking or steering.

Highlight the function through iDrive, then press and hold the desired programmable memory button until a signal sounds.

Do not replace a xenon headlight bulb yourself; have all xenon-system work performed only by a service center because high voltage can cause fatal injuries.

With LED headlights, all front lights and side indicators use LED technology; contact your service center if a malfunction occurs.

1. Set the tire pressures correctly before resetting, because reliable pressure-loss signaling is not assured otherwise.
2. Reset the system after every pressure adjustment and every tire or wheel change, using wheels with TPM electronics.
3. On the Control Display, select Vehicle info, Vehicle status, and Perform reset.
4. Start the engine without driving, select Perform reset, and then drive away.
5. After driving faster than 19 mph/30 km/h briefly, the system accepts the pressures and completes the reset automatically.