2025–2027

If the indicator keeps flashing after all access points are closed, the alarm system has an error.

2025–2027

A light that flashes every two seconds means the alarm system is switched on.

2025–2027

BMW recommends replacing the interior filter during the vehicle's preventive maintenance.

2022

Have the microfilter changed during vehicle maintenance.

2018–2021

Have the microfilter changed during vehicle maintenance; it filters dust and pollen in external and recirculated-air modes.

2025–2027

Press the automatic lights and low-beam headlights button; the system responds to ambient brightness, but turn the lights on manually in fog or haze.

2025–2027

1. Initialize the monitor after adjusting tire pressure or changing a tire or wheel, but do not initialize it while driving with snow chains.
2. Open Apps menu / "Vehicle" / "Vehicle status" / "Flat tire monitor," then switch on the drive-ready state.
3. Select "Perform reset" and drive off; initialization completes while driving and resumes automatically if interrupted.

2022

1. Initialize it after adjusting tire pressure or changing a tire or wheel, but not while driving with tire chains.
2. In iDrive, select "My Vehicle," "Vehicle status," and "Flat Tire Monitor."
3. Start the engine without driving away, then select "Perform reset."
4. Drive away; initialization completes while driving and resumes automatically if you interrupt and later continue driving.

2022

The microfilter removes dust and pollen from the air in external-air and recirculated-air modes.

2022

Depress the accelerator so driving stability control systems can distribute power to the wheels; if necessary, activate Dynamic Traction Control.

2018–2021

After driving on poor roads, check the wheels and tires for damage to maintain driving safety, and clear heavy soiling from the body.

2022

All-wheel drive can help improve drive power.

2018–2021

All-wheel drive can help improve forward motion, but do not drive on unpaved terrain because stones or branches can damage the vehicle.

2022

Updates and related current notes are available on the www.bmw.com/update website.

2018–2021

To display the installed software version, select "My Vehicle," "iDrive settings," "Software update," then "Show current version."

2018–2021

If it flashes after unlocking until ignition is switched on, for no more than approximately 5 minutes, an alarm has been triggered.

2018–2021

If it flashes for approximately 10 seconds, then briefly every 2 seconds, close any door, hood, or tailgate that is not correctly closed; the inactive sensors then switch on.

2018–2021

Press the lever past its resistance point to turn the signal on, then press it past the resistance point in the opposite direction to turn it off.

2018–2021

In iDrive, select "My Vehicle," "iDrive settings," "Mobile devices," the device, and "Disconnect device"; it remains paired for later reconnection.

To reconnect it, select the same device path and choose "Connect device"; its previously assigned functions are restored, although they may be deactivated on another connected device.

2018–2021

If all requirements and pairing steps were completed but the phone still will not connect, too many connected Bluetooth devices may be the cause.

Delete other vehicle Bluetooth connections, remove known vehicle connections from the phone, and start a new device search; if the phone is in power-save mode or has limited battery, charge it.