2024–2026

1. You can create shortcuts only with an active BMW ID or driver profile.
2. Press and hold the desired function, then select "Add to shortcuts."

2024–2026

At low speeds, open Apps menu / "Vehicle" / "Exterior lighting" / "Parking lights," then tap the parking lights button.

Do not use the parking lights for extended periods because they can drain the vehicle battery and prevent drive-ready state.

2024–2026

1. Do not initialize the system while driving with snow chains.
2. Open Apps menu / "Vehicle" / "Vehicle status" / "Flat tire monitor".
3. Switch on drive-ready state, then select "Perform reset".
4. Drive off to complete initialization while driving.
5. Initialization may be interrupted and automatically continues when driving resumes.

2023

1. Initialize the Flat Tire Monitor after adjusting tire pressure or changing a tire or wheel, but not while driving with tire chains.
2. Via iDrive, select "My Vehicle," then "Vehicle status," and then "Flat Tire Monitor."
3. Start the engine without driving away, select "Perform reset," and drive away.
4. Initialization completes while driving, can be interrupted, and resumes automatically when driving continues.

2024–2026

Braking assistance may not work, so pressing the brake pedal harder could be necessary.

Have the vehicle inspected immediately at an authorized service center, another qualified service center, or a repair shop.

2021–2022

If the light flashes for approximately 10 seconds, then every 2 seconds, doors, the hood, or tailgate are not correctly closed.

Close the open access points; the interior motion and tilt alarm sensors activate after they are closed.

2021–2022

1. Park as far from passing traffic as possible, on solid ground, and switch on the hazard warning system.
2. Set the parking brake, straighten the front wheels, and engage the steering wheel lock.
3. Have everyone leave the vehicle and remain in a safe place outside the immediate area, such as behind a guardrail.
4. Set up a warning triangle at an appropriate distance if necessary.

2021–2022

• If too many Bluetooth devices are connected, delete other vehicle connections and the phone's known connections, then start a new search.
• If the phone is in power-save mode or has little battery remaining, charge it before trying again.

2021–2022

After you switch on the ignition, the instrument cluster briefly shows the available distance or time until scheduled maintenance.

For details, open My Vehicle > Vehicle status, tilt the Controller left, select Service required, and choose an entry.