Immediately stop charging by locking and then unlocking the vehicle with the remote control key.

The level should be near the "MAX" mark; if not, check the brake pads, clean the cap, and use only DOT4 fluid from a sealed container.

If you drive in dusty environments or cities, change the cabin air filter twice as often, if necessary.

Anticipate slowing and brake smoothly, using regenerative braking when possible; use air conditioning rather than heating to demist the passenger compartment.

Return the lighting control stalk to the central position to switch off the parking lamps.

1. After replacing the battery or when a fault occurs, you may need to reinitialize the remote control.
2. Insert the mechanical key into the lock to open the vehicle.
3. Hold the electronic key against the backup reader on the steering column until the ignition switches on.
4. If equipped with an automatic gearbox or drive selector, keep it in P and depress the brake.
5. Press the START/STOP button to switch on the ignition.
6. If the fault persists, contact a dealer or qualified workshop without delay.

Move the electronic key away from nearby electronic devices, mobile phones, laptops, or strong magnetic fields.

If the door handle still does not lock or unlock the vehicle, bring the key closer and repeat the action.