2026

After pairing your phone via Bluetooth, choose Phone, select Keypad, and dial the number on the center display.

2026

1. Choose Connectivity on the status bar, then choose Bluetooth to enable the vehicle to search for available phones.
2. Choose Pair a Device, open Bluetooth settings on your phone, and choose Next on the center display.
3. When your phone appears, choose it, confirm the device codes match, and choose Pair on your phone.
4. After pairing, the vehicle saves the connection, so you do not need to pair your phone again.

2026

Once underway, TPMS sensors link automatically and finish learning in under 10 minutes; the displays then show pressure values.

Pressure may not show until the vehicle goes above 19 mph (30 km/h) for as long as 10 minutes.

2024

If the combined telltale flashes for about one minute and then stays illuminated, the TPMS has detected a malfunction.

The system may not detect or signal low tire pressure as intended, so check the indicator after replacing tires or wheels to confirm TPMS operation.

2026

Save a valid payment method to the primary owner account and use Navigation to find supported stations; charging then starts without manual setup and bills that account automatically.

Find charging session receipts in the mobile app.

2026

Pull the lights stalk toward you for temporary high beams, or push it away with low beams on to toggle them.

Ensure high beams are appropriate for the weather and driving conditions.

2024

1. 1. In Energy, tap the charge limit bar.
2. 2. Select Custom for 50% to 100%, Daily for 70%, Extended for 85%, or Max for 100%; choose a lower limit to shorten charging when maximum range is not needed.