If no valid operation occurs within 10 minutes, the vehicle stops and powers off, with the turn signals flashing twice.

After starting, press and hold the smart key's remote start/stop button for two seconds to switch the ignition off; the turn signals flash twice.

Follow the regular maintenance schedule, with service timing based on mileage or months, whichever comes first; special conditions may require more frequent maintenance.

The estimated time to full charge can vary slightly with temperature, state of charge, and charging facilities; it appears on the instrument cluster.

On the infotainment touchscreen, open Audio Display, Instrument, and Range Display Mode, then select Standard or Dynamic; Standard is the default.

Set the switch lever to position lights and low beam, then switch off vehicle power; the lights shut off after 10 seconds with the driver's door closed or 10 minutes when it is open.

Turn off the automatic lights, position lights, low beam, rear fog lights, or daytime running lights through the infotainment touchscreen at Light > Exterior Light.